New Scara Software Robot with Teach&play Plus G-code in various applications , Call for More Information !
G00 Rapid move,
G01 Linear feedrate move,
G02 Clockwise move , G03 Counter clockwise moveG04 Dwell time G4 L#,
G08 Spline smoothing on, optional L# number of blocks to buffer,
G09 Exact stop check, spline smoothing Off , G10 Linear feedrate move with decelerated stop , G11 Controlled Decel stop
G20 Inch mode , G21 Millimeter mode,
G28 move to position relitive to machine zero , G40 Cancel tool comp,
G41 Tool comp left,
G42 Tool comp right , G53 Cancel fixture coordinate offsets,
G54-G59 fixture coordinate offsets 1 through 6,
G70 Inch mode,
G71 Millimeter mode
G80 Cancels modal cycles and canned cycles,
G81 Drill cycle G81 X# Y# Z# F# R#,
G82 Dwell cycle G82 X# Y# Z# F# R# L#,
G83 Peck cycle G83 X# Y# Z# F# R# Q# , G84 Tapping cycle G84 X# Y# Z# F# R# C#, G85 Boring cycle 1 bore down, feed out G85 X# Y# Z# F# R#
G86 Boring cycle 2 bore down, dwell, feed out G86 X# Y# Z# F# R# L# , G88 Boring cycle 3 bore down, spindle stop, dwell, feed out G88 X# Y# Z# F# R# L# , G89 Boring cycle 4 bore down, spindle stop, dwell, rapid out G89 X# Y# Z# F# R# L# , G90 Absolute mode , G91 Incremental mode , G92 Home coordinate reset , G100-G199 User-definable G codes ,199 User-definable M codes , |
